Tips On Fixing A Noisy Garage Door

8 October 2015
 Categories: , Blog

Share

Are you at the end of your rope due to a noisy garage door? Your garage door is typically made up of a system of pulleys, springs and cables that could be contributing to the noise level. Fortunately the noise can be reduced using a few quick fixes and maintenance routines to get your door to work smoothly. Read on for tips on how to get rid of a noisy garage door and enjoy some much needed peace and quiet.

Tighten the nuts and bolts

The daily vibrations of your garage door may have caused some of the bolts and nuts in the framework to come loose over time. These loose bolts often pick up the motor's vibration and transfer that energy into rapid movements that contribute to the noise level when your garage door is being operated.

A simple way around this problem is to use a wrench to check and tighten all loose bolts connecting the door opener's framework. You may also use a socket set to tighten up nuts that secure the roller assemblies to the garage door, so as to reduce vibrations that reach the home's framing studs and drywall.

Another way to reduce the vibration of the door is to replace worn out rubber padding where the chain track fastens to the wall above the garage door. Replacing this padding is usually halt vibration in the space between the motor mounts and the ceiling, effectively keeping noise levels down.

Replace worn out rollers and springs

Most garage doors have metal rollers that ride on a metal track. When these rollers get worn out or lack lubrication, they produce a rattling noise. In most cases, a good squirt of metal lubricant on the track and rollers should fix the problem. If the noise problem persists after lubricant is applied, you might want to consider replacing any worn out metal rollers with nylon ones that are relatively quieter.

Worn springs may also be the cause of the noise from your garage door. Have a look at the extension springs along the upper tracks on both sides of the door for any rust that could be hindering their smooth movement. If the springs are poorly lubricated, they will usually produce a small, clanging sound that can easily be eliminated by applying some motor oil.

If you notice any damage on the torsion springs that are found on the top of the door, call in an expert like Garbers Of Richmond Inc to replace them. Attempting to fix these springs yourself could be extremely dangerous, as they are often under high tension and could easily snap to catastrophic effect.